FAQs
Frequently Asked Questions
1. What is a Fire Alarm System?
A fire alarm system detects smoke, heat, or fire and alerts occupants to evacuate the building.
2. What Are the Main Components of a Fire Alarm System?
- Fire Alarm Control Panel (FACP)
- Smoke Detectors
- Heat Detectors
- Pull Stations
- Horn/Strobes
- Duct Detectors
- Monitor Modules
- Control Modules
- Power Supply & Batteries
3. How Often Must Fire Alarm Systems Be Tested?
According to NFPA 72:
| Device | Test Frequency |
| Smoke Detectors | Annually |
| Pull Stations | Annually |
| Horn/Strobes | Annually |
| Batteries | Semi-Annual |
| Duct Detectors | Annually |
| Sprinkler Waterflow | Quarterly |
4. What Is a Supervisory Signal?
A supervisory signal indicates:
- Valve tamper switch
- Low air pressure
- Fire pump issue
- Other system monitoring condition
Not an emergency — but needs attention.
5. What Is a Trouble Signal?
A trouble signal indicates:
- Ground fault
- Open circuit
- Battery issue
- Device offline
System still works but needs service.
6. What Is an Alarm Signal?
An alarm signal indicates:
- Smoke detected
- Heat detected
- Pull station activated
- Waterflow switch activated
This triggers evacuation and fire department notification.
7. What Is a Duct Detector?
A duct detector detects smoke in HVAC ducts and:
- Shuts down air handlers
- Prevents smoke spread
8. Do Duct Detectors Require Remote Test Stations?
Yes.
Most codes require:
- Remote test switch
- Remote LED indicator
9. How Long Must Fire Alarm Batteries Last?
NFPA 72 requires:
- 24 hours standby
- 5 minutes alarm (or 15 minutes for voice systems)
10. What Is a NAC Circuit?
NAC = Notification Appliance Circuit
This powers:
- Horns
- Strobes
- Speakers
1. What Is a Burglar Alarm System?
A system designed to detect:
- Unauthorized entry
- Motion
- Glass break
- Door/window opening
2. What Are Common Security Devices?
- Door Contacts
- Motion Detectors
- Glass Break Sensors
- Keypads
- Sirens
- Cameras
3. What Is a Motion Detector?
Detects movement using:
- PIR (Passive Infrared)
- Microwave
- Dual Technology
4. What Is a Door Contact?
A magnetic switch that triggers when:
- Door opens
- Window opens
5. What Is a Zone?
A zone is a group of devices monitored together.
Example:
- Zone 1 = Front Door
- Zone 2 = Motion
- Zone 3 = Back Door
6. What Is a Keypad?
Used to:
- Arm system
- Disarm system
- View trouble conditions
7. What Is Central Station Monitoring?
When alarms send signals to:
- Monitoring center
- Dispatch police/fire
8. What Is a False Alarm?
Alarm triggered by:
- User error
- Motion from pets
- Improper installation
- Low battery